WQMA assumes no responsibility for the items being sold or the transactions between the buyer and seller.  See bottom of page for  submission information.

          Updated 12/22/16

MOTIVATED SELLER..LET'S MAKE A DEAL!!   Complete Quarter Midget Sell-out.  

        76" Fiser roller and matching cart $1,000 (yellow, pink, purple)  
78" Fiser roller and matching  cart $1,000 (black, orange, blue)
    78" Profab roller and matching cart $1,000 (blue, orange, black)
80" 400-series Fiser roller with wing and pit cart $700 (black, orange).  "Old" bar car (only good for dirt) actually works awesome on dirt like a sprint car. My son won many races with it at the winter indoor track.   



- 1 set of tanner gen 2 shock's just rebuilt by Kelly Tanner. $375


- 2 tanner gen 2 shocks $75


- Tanner shock vise brand new - $150


- Tanner shock tools in a case - $85

  - 3-sets of tanner vision shock's. $425 a set.  Two sets of only have a few races on them, the other set has a full season. They are the tanner 45's quad flow piston, I gained 2 tenth's just putting them on. Shocks are all in excellent condition - no leaks.




  Crash cart with tire rack - $325


Turbo tire changer with 5" - 6" rings and all accessories and heavy-duty steel black powder coated stand - $350
- 2 sets of tanner alignment bars - $75 each
- 2 car covers - $50 each
- box of gears (motor and axle) - $10 each
- Various springs - $15 each
- Various rims $10 - 15 each
20-foot long custom black matt Powder coated tire rack - $250




2 outlaw 120's. 1 has 6,000 rpm camshaft, advanced ignition timing, ported head with lightened valves, milled to increase compression and a 160 carb. Motor only ran 2 times last year. $700. the other engine has 7000 rpm cam, billet rod, billet Aluminum flywheel, ported head, 22 lb valve springs. Milled head to increase compression. Motor was run 1 time last year.  $850
 (not QMA legal - only good for indoor open class)

Outlaw WF motor  50,000's shaved head, after market  aluminum rod, 30 over piston, wf camshaft, new gas carburetor. $800  This motor has lots of compression and is nasty fast!! (not QMA legal only good for indoor open class or maybe mod)

Lederer light 160 motor. $500 strong motor has 2 seasons on it and still really fast. Oil changed every 3 races.

Chances are if you ask for something else I may have it.  Motivated seller!!!
Email or text Chad - or 425-971-8615 (I live in a bad service area so text is better than call). 

Two 76" Fisers


Race ready with 160 or 120 engine.  $2,000 each or $4,500 for both and all the spare parts.  Call or text Doug at 425-346-5353. 

Honda 160 Motor - $450 OBO

Freshened up February 2014. Always been a Fast motor. Did not run motor in 2016 season. Comes with exhaust.

Contact Kelly Belew at or 425-754-7910.

Strong, Fast World Formula motor - $1,200 OBO


Only 2 races on it since freshened up. Comes with 2 full exhausts and 1 muffler end, fuel pump, extra spark plugs, multiple gaskets and other engine parts.  

Contact Kelly Belew at or 425-754-7910.

Complete Sale of Grantham ProFab Quarter Midget Program - $4,000



If you follow Quarter Midgets in the NW, you know these cars. My son ran these cars in 2015 and won a total of 43 A-Main features with several all-time track records across Region 9. My daughter ran the white car as a Novice this year and set fast time / track record every time she timed-in (total of 7 track records across Region 9 in 2016).

My kids have outgrown these cars and it is time for them to go.  Cars are sold as rollers (NO MOTORS) and include the following:

Fiser front and rear axles. Front axles are 3D and I have several spares. Rear axle is splined and comes with quick-change gear hub and spares.

Setup book with notes for various tracks throughout Region 9.  Tanner shocks and valving that has served us so well.  Custom upholstery that I designed to fit my small kids comfortably (this is critical for kids to be safe and fast!).  Cars have been updated with two-piece sliding motor plate with chain tension adjuster.

Spare spindles, front and rear bumpers, body panels.  Pit carts.  I have too many spare parts to list them all here.

$4,000 for complete program (NO MOTORS).  I can setup cars with motors for Novice family looking to get started in quarter midgets, just let me know what your plan is and I will give you estimate on additional cost.

I look forward to seeing these cars win more races. These cars are FAST!!! Get these out of my garage and let me help you put your kid on the podium!

Chris Grantham 425.268.0135

35" Nervo Kong

Comes as a roller.  Has tanner gen 3 shocks, and 1 spare shock, quick disconnect steering wheel, pit cart, sliding motor plate, comes with spare front and rear axle, some radius rods, pair of spindles and a set of bathroom scales and a car cover.

Any questions call or text 253-302-2534 or email  Thanks, Bill

35" Nervo Extreme

Comes as a roller.  Comes with 2 spare front axles, spare rear axle, bunch of radius rods and 1 spare shock.  Spindles and hubs, sliding motor plate, hand restraints and neck collar and a pit cart.  Was a good jr car.

Call or text 253-302-2534 or email Thanks, Bill

2010 Nervo G9 Grizz

Car comes as a roller has Afco shocks with 3 valved 3 and 1 valved 3/2.  Sliding motor plate, quick disconnect steering wheel, pit cart and a cover. Also comes with a brand new front axle and some spare radius rods.

Call or text 253-302-2534 or email Thanks, Bill   

2 76" Fisers - $2,800 each OBO


The orange car is a 2007. The black car is a 2008. Both cars have Kirkey race seats installed, sliding motor plates, and mychrons. I have some spares parts. Selling both cars as rollers. I do have a UT1-160 available as well.

For more information call 253-347-2849 or email

2015 area 51 QRC intermediate Cage Kart 2 Race old Redline Performance Engine.  Also 2015 Area 51 QRC roller Exc condition: $3,000.

Contact Glenn Borden at or 360-589-0513.

For sale: 2 Half midget engines - Honda GX Clones


Features the Thompson clutch drive system. No more push start! These motors make some serious horsepower and have proven reliable. Asking $1,500 for clutch drive engine.



Features a GX 200 crank and gearbox. This engine will bolt right in place of a GX160. ( cylinder deck height is only 3/16" taller than 160). You do have to push start but cam has compression release.  $1,200 for gearbox engine.

Both engines come complete with Alky Carb. Race ready, fresh and very strong.  Contact Bill Thompson at

To submit your classified ad please email

PLEASE NOTE: When sending your ad, please DO NOT embed the photo in the email, and keep text formatting to a minimum - this will make it MUCH less time-consuming for us!   If possible, please re-size the picture no larger than 6 x 8".

Ads are automatcially removed 3 months after posting. If your item has not sold, please contact us before the ad expires so we can renew it. Thank you!